[j-nsp] Layer 2 feature on srx
bruno
bruno.juniper at gmail.com
Mon Apr 9 05:10:48 EDT 2012
not need to zone . coz i set it to packet mode
------------------
Best Regards,
Bruno
------------------ Original ------------------
From: "ashish verma"<ashish.scit at gmail.com>;
Date: Mon, Apr 9, 2012 05:09 PM
To: "bruno"<bruno.juniper at gmail.com>;
Cc: "juniper-nsp"<juniper-nsp at puck.nether.net>;
Subject: Re: [j-nsp] Layer 2 feature on srx
Are you missing zones/policies since it is SRX?
On Mon, Apr 9, 2012 at 7:05 PM, bruno <bruno.juniper at gmail.com> wrote:
hello expert,
i use two srx210h to test some Layer 2 networking features on MX Series routers. the topo is very simple
PC1---SRX1----SRX2----PC2. the link in srx1---srx2 is set to trunk mode. PC1 and PC2 is belong to vlan 100. PC1 can't ping PC2.
interfaces {
ge-0/0/1 {
description TO-SRX2;
vlan-tagging;
unit 0 {
family bridge {
interface-mode trunk;
vlan-id-list [ 100 200 ];
}
}
}
fe-0/0/4 {
unit 0 {
family bridge {
interface-mode access;
vlan-id 100;
}
}
}
irb {
unit 100 {
description "GW For VLAN 100";
family inet {
address 100.1.1.254/24;
}
}
unit 200 {
description "GW For VLAN 200";
family inet {
address 200.1.1.254/24;
}
}
}
}
security {
forwarding-options {
family {
mpls {
mode packet-based;
}
}
}
}
bridge-domains {
vlan_100 {
vlan-id 100;
routing-interface irb.100;
}
vlan_200 {
vlan-id 200;
routing-interface irb.200;
}
}
------------------
Best Regards,
Bruno
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
More information about the juniper-nsp
mailing list