[j-nsp] MX80 MPLS config example

[Kevin Wormington]

Hi,

I'm wanting to transport a layer2 VLAN via MPLS between two MX80s (Trio 
based) and on PE1 the customer traffic is coming into the PE interface 
as tagged traffic some of which are terminated directly to layer3 as 
units on the MX80s interface.  PE2 the traffic will be untagged toward 
the customer.  MPLS is not configured at all now on PE1/PE2...does 
anyone have any example configs for the simplest config possible to 
accomplish this?

JunOS is 10.4R9.2 on both units.

Thanks,

Kevin