[j-nsp] MX80 MPLS config example

Doug Hanks dhanks at juniper.net
Thu Apr 19 16:11:49 EDT 2012


Oldie, but a goodie.  Still relevant for the MX:

http://www.juniper.net/us/en/training/certification/JNCIE_studyguide.pdf

Thank you,

-- 
Doug Hanks - JNCIE-ENT #213,  JNCIE-SP #875
Sr. Systems Engineer
Juniper Networks
Skype:  douglashanks
925.577.4296






On 4/18/12 7:13 AM, "Kevin Wormington" <kworm at sofnet.com> wrote:

>Hi,
>
>I'm wanting to transport a layer2 VLAN via MPLS between two MX80s (Trio
>based) and on PE1 the customer traffic is coming into the PE interface
>as tagged traffic some of which are terminated directly to layer3 as
>units on the MX80s interface.  PE2 the traffic will be untagged toward
>the customer.  MPLS is not configured at all now on PE1/PE2...does
>anyone have any example configs for the simplest config possible to
>accomplish this?
>
>JunOS is 10.4R9.2 on both units.
>
>Thanks,
>
>Kevin
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp




More information about the juniper-nsp mailing list