[j-nsp] MX80 MPLS config example

[Saba Sumsam]

Hi,
You can do it using the 'L2Circuit' feature on Juniper, after enabling MPLS
& LDP protocols on the PE-facing interface on each of the MX routers.

This should help:
http://www.juniper.net/techpubs/software/junos/junos95/feature-guide/id-11637858.html

Regards,
Saba Sumsam


On Thu, Apr 19, 2012 at 12:13 AM, Kevin Wormington <kworm at sofnet.com> wrote:

> Hi,
>
> I'm wanting to transport a layer2 VLAN via MPLS between two MX80s (Trio
> based) and on PE1 the customer traffic is coming into the PE interface as
> tagged traffic some of which are terminated directly to layer3 as units on
> the MX80s interface.  PE2 the traffic will be untagged toward the customer.
>  MPLS is not configured at all now on PE1/PE2...does anyone have any
> example configs for the simplest config possible to accomplish this?
>
> JunOS is 10.4R9.2 on both units.
>
> Thanks,
>
> Kevin
> ______________________________**_________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
>