[j-nsp] redistributing label between rsvp and ldp

[Uzi Be]

hi -
yeah p3 and p4 support both ldp and rsvp, but pe1 can only run rsvp and pe 2 can only run ldp. 

ce - pe1 - p1 - p2 - p3 -p4 -pe2 - ce
thanks
Andrew

> Date: Sun, 29 Apr 2012 13:04:06 +0800
> Subject: Re: [j-nsp] redistributing label between rsvp and ldp
> From: diogo.montagner at gmail.com
> To: good1 at live.com
> 
> Does p3 and p4 support both LDP and RSVP ?
> 
> ./diogo -montagner
> JNCIE-M 0x41A
> 
> 
> On Sun, Apr 29, 2012 at 12:45 PM, Uzi Be <good1 at live.com> wrote:
> >
> > hi,
> > I was just testing out to swap labels between two different signaling protocols (ldp and rsvp). lets say we have two different network, one is running ldp and the other one is running rsvp (same AS, so no inter-as options).
> > ce - pe1 - p1 - p2 - p3 -p4 -pe2 - ce
> > so pe1 - p1 - p2 -p3 are running rsvp and p4-pe2 are running ldp, and edge ce's are using l3vpn. what are the options to have a labeled path from pe2 to pe1 (considering that pe1 is not going to run ldp protocol, and pe2 can't use rsvp so ldp tunneling is not an option here).
> > thanks in advance for your comments.
> > Andrew
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp