[j-nsp] EX to Cat6500 link?

[JP Velders]

> Date: Wed, 1 Aug 2012 19:39:31 -0400
> From: William McLendon <wimclend at gmail.com>
> Subject: Re: [j-nsp] EX to Cat6500 link?

> just to close this out -- we were able to get the circuit up and 
> running -- the issue was with how the Ciena gear was configured.  
> I've never done work on Ciena gear but it had something to do with a 
> "GFP" setting.  Whatever it was set to, they changed it and up 
> popped the circuit and the BGP session.

GFP is an encapsulation used on the WDM/TDM (grey area) side.

Link state propagation works seperately from the "data plane"... :(

Kind regards,
JP Velders