[j-nsp] VLAN into a VPLS instance
juniperdude at gmail.com
Fri Aug 10 09:39:54 EDT 2012
Use an LT to crones-connect the bridge-domain with the vlan access interfaces (which you do a push-vlan-tag on ingress), and stitch the LT into the VPLS instance.
I was going to say "sure, put the access ports into a VPLS and do a vlan-push on ingress; and a pop on egress" but yes, that raises an issue as it would pop ANY packet returning from the MPLS-universe trying to leave the VPLS (and not just the one with the specific vlan tag); so you'd end up with "leakage" from the cloud.
On 10/08/2012, at 7:50 PM, William Jackson <william.jackson at gibtele.com> wrote:
> I want to setup an MX with multiple access ports in VLAN, I then want to bridge that vlan into a VPLS instance.
> So all L2, no interface vlan.XX stuff, is this possible?
> juniper-nsp mailing list juniper-nsp at puck.nether.net
More information about the juniper-nsp