[j-nsp] MX960 AC power strip

OBrien, Will ObrienH at missouri.edu
Thu Aug 23 10:07:19 EDT 2012

We run 208v to ours, which reduces the amp load. Then we use 1u rackable tripplite PDUs on 30a circuits with C13s and C19s and C19-C20 cables.


On Aug 23, 2012, at 8:59 AM, JA wrote:

> Hi
> I need advice if someone is having an MX960 up on AC power.
> Usually high capacity (32A) power bars (PDU) come with C13 or C19 outlets
> while Juniper has no provision for such power cords. If European power
> cords are ordered with MX960, the CEE7/7 plug can be connected to Schuko
> outlets. But there is no Schuko PDU that supports more than 16A. One can
> easily exceed 16A if two power supplies are connected on same PDU.
> Can anyone recommend some alternative or if anyone faced similar situation?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp

More information about the juniper-nsp mailing list