[j-nsp] MX960 AC power strip

[Scott Harvanek]

You can easily get >30A PDUs with L6-20Rs which is what Juniper 
recommends for the MX960...

e.g. 
http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=AP7893

Geist, ServerTech, etc. all also make many many options.

-Scott H.
-Login Inc.
On 08/23/2012 07:59 AM, JA wrote:
> Hi
>
> I need advice if someone is having an MX960 up on AC power.
>
> Usually high capacity (32A) power bars (PDU) come with C13 or C19 outlets
> while Juniper has no provision for such power cords. If European power
> cords are ordered with MX960, the CEE7/7 plug can be connected to Schuko
> outlets. But there is no Schuko PDU that supports more than 16A. One can
> easily exceed 16A if two power supplies are connected on same PDU.
>
> Can anyone recommend some alternative or if anyone faced similar situation?
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp