[j-nsp] Transporting VLAN between two 10GE ports on MX80

[sthaug at nethelp.no]

> > I need to transport VLAN (switch / bridge) from port xe-0/0/1 (unit
> > 200) to port xe-0/0/2 (unit 200) on MX80.
> > It it possible ? If yes can anyone paste configuration for this task.
> > Can I enable QinQ for this VLAN also ?
> > 
> > BTW. I'm running 10.4S10
> 
> You can try doing a simple circuit-cross-connect since there are only
> two local ports involved.  I /think/ QinQ should transparently pass
> through this--just make sure your MTU is large enough.

Yup, it absolutely passes through. Nice and transparent. We like
circuit-cross-connect :-)

Steinar Haug, Nethelp consulting, sthaug at nethelp.no