[j-nsp] Load balance on AE MX960

[Abel Alejandro]

Nevermind, sorry for the noise I think I found the solution at
http://www.juniper.net/techpubs/en_US/junos10.3/topics/example/layer-2-s
ervices-load-balancing-and-link-aggregation-example.html

Thanks.


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Abel Alejandro
Sent: Thursday, August 30, 2012 9:07 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] Load balance on AE MX960

Hello,

I have a pair of MX960 with a simple l2circuit connection. My two PE-PE
interfaces are load sharing the traffic almost perfectly.
However the CE interfaces, which are aggregated interfaces, are only
using one link for egress.

             +---------+                            +---------+       
CE1  --- ae4 | MX960-1 | --- xe-1/1/1 ---- xe-1/1/1 | MX960-1 | --- ae0
--- CE2
             +---------+ -- xe-11/1/1 --- xe-11/1/1 +---------+

In this instance, the XE interfaces are load sharing right, while the
ae4 and ae0 are not.

Any ideas?

Thanks,
Abel.


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp