[j-nsp] R: Routing Instance BGP Full Routing High Memory persists

[Riccardo S]

With m7 the only useful action solving the issue was reboot...

sent with Android

Giuliano Medalha <giuliano at wztech.com.br> ha scritto:

>People,
>
>We are doing some BGP tests using routing-instances on MX5-T-DC routers.
>
>We have created a routing-instance to receive 3 full routing inet.0 tables.
>
>The master routing has 3 majors full routing tables too.
>
>Before the tests we check the RE percentage of using memory ... using:
>
>Router> show chassis routing engine
>
>It show 47% usage.
>
>After the creation of the routing-instance (type virtual-router) - named
>TEST  we could receive more 3 full routing tables on the TEST.inet.0 table
>
>Using the same command is show to us:
>
>Router> show chassis routing engine
>
>87% memory utilization
>
>After we remove the routing-instance configuration with a commit command in
>sequence ... it still shows the same 87% of memory utilization
>
>It this procedure is correct ?    Is it any update command to clear the
>memory allocation without disrupting forwarding services ?
>
>Can you please give me some feedback about it ?
>
>Did anyone see it before ?
>
>Thanks a lot,
>
>Giuliano
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/juniper-nsp
>