[j-nsp] OSPF on a VRRP Interface

[Ali Sumsam]

Off the top of my head, we cant have OSPF neighbor via VRRP interface, the
reason would be the router-id. What router-id should it pick.

Regards,

*Ali Sumsam CCIE*
*Network Engineer - Level 3*
eintellego Pty Ltd
ali at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)410 603 531

facebook.com/eintellego
PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Wed, Dec 5, 2012 at 5:40 PM, Luca Salvatore <Luca at ninefold.com> wrote:

> It was just a thought, I was having some issues but turns out I was
> missing an OSPF neighbour... doh!
>
>
> Luca
>
>
> -----Original Message-----
> From: Per Westerlund [mailto:p1 at westerlund.se]
> Sent: Wednesday, 5 December 2012 4:10 PM
> To: Luca Salvatore
> Cc: juniper-nsp at puck.nether.net
> Subject: Re: [j-nsp] OSPF on a VRRP Interface
>
> Why would you want to do that (assuming you are running OSPF on all VRRP
> group members)?
>
> /Per
>
> Sent from my iPad, please ignore stupid spelling corrections!
>
> 5 dec 2012 kl. 05:57 skrev Luca Salvatore <Luca at ninefold.com>:
>
> > Hi,
> >
> > If I run OSPF on an interface that is also running VRRP, is it possible
> for OSPF to use the VRRP virtual IP as the next-hop for ospf neighbours?
> >
> > Thanks,
> >
> > Luca
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>