[j-nsp] J-Flow Configuration on MX5

[Samol]

Hi Nikita,

*I believe this is RE based. below is configuration:*
*
*
Router> show configuration forwarding-options
sampling {
    input {
        rate 100;
    }
    family inet {
        output {
            flow-server 10.10.10.100 {
                port 9000;
                autonomous-system-type origin;
                version 5;
            }
    }
}


Router> show configuration interfaces ge-1/1/1.24
vlan-id 24;
family inet {
    sampling {
        input;

It's MX5-T and we use NFSEN as flow collector.

Thanks
Sam

2012/12/11 Nikita Shirokov <ns.hando at gmail.com>

> what kind of j-flow (re bassed or inline-jflow) are you trying to
> configure ? could you share the configuration? we have RE-bassed on our
> mx80 configured w/o any issues, and inline on 960s
> typical configuration for re based will be something like:
> input {
>     rate 2000;
>     run-length 0;
>     max-packets-per-second 10000;
> }
> family inet {
>     output {
>         flow-inactive-timeout 60;
>         flow-active-timeout 60;
>         flow-server x.x.x.x {
>             port 5000;
>             source-address y.y.y.y;
>             version 5;
>         }
>     }
> }
>
>
>
>
> 2012/12/11 Samol <molasian at gmail.com>
>
>> Has Anyone had experiences in configuring J-Flow on MX5 and it works? I
>> have been trying to find the documents, most of them are for SRX and J
>> series and not for MX series. I think the configuration would be the same
>> ,
>> but somehow it's not working for me. Any link, idea ,advice all would be
>> very appreciated.
>>
>> Cheers,
>> Samol
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>