[j-nsp] M-Series DHCP Server

[Tomasz Mikołajek]

Hello.
I could be wrong, but I think that on M-series router you can't configure
DHCP server. In datasheets is only  information about DHCP relay option.

2012/2/3 Joe Shen <sj_hznm at yahoo.com.cn>

>
> hi,
>
> don't know too much about M series, in E320 configuration should like:
>
> ip dhcp-local unique-client-ids
> ip dhcp-local pool wlanpool
>  network 10.10.0.0 255.255.128.0
>  dns-server 10.101.17.6 10.101.17.47
>  default-router 10.10.0.1
>  lease 0 0 20
> !
> ip dhcp-local excluded-address 10.10.0.1
>
>
> To our experience , Juniper BAS CPU load grow with DHCP subscribers, esp.
> when number of concurrent online subscriber is over 10k, CPU load may
> nearly 100%.
>
>
>
>
> --- 12年2月3日，周五, GIULIANO (WZTECH) <giuliano at wztech.com.br> 写道：
>
> > 发件人: GIULIANO (WZTECH) <giuliano at wztech.com.br>
> > 主题: [j-nsp] M-Series DHCP Server
> > 收件人: juniper-nsp at puck.nether.net
> > 日期: 2012年2月3日,周五,上午9:15
> > Hi,
> >
> > We are trying to configure JUNIPER M-Series with
> > dhcp-local-server without any good results.
> >
> > Basically we are configuring:  set system services
> > dhcp-local-server and set access address-assignment
> >
> > It is not working and the router is dropping the DHCP
> > Requests ...
> >
> > Does anyone has some experience with this ?  How can I
> > make it work ?
> >
> > Thanks a lot,
> >
> > Giuliano
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> >
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>