[j-nsp] WAN-PHY support for EX-series 10g interfaces

[Tim Jackson]

LAN-PHY only on EX4200/4500 as far as i know.

--
Tim

On Tue, Feb 14, 2012 at 11:53 PM, Dale Shaw <dale.shaw+j-nsp at gmail.com> wrote:
> Hi,
>
> Potentially odd question here but does anyone know, from 1st hand
> experience, whether WAN-PHY mode is supported on 10g interfaces in
> EX-series devices? Specifically EX4200 and/or EX4500?
>
> I ask because we have a new carrier circuit being delivered in the
> not-too-distant future and we need to plug something into it to test
> it. Eventually we'll jam a SRX5800 with a 4x10GE DPC onto the end of
> it but in the meantime it would be handy to terminate and test with
> something .. smaller.
>
> The existing interfaces we have (provisioned before my time)
> apparently needed to be configured with the "framing wan-phy" and
> "optics-options wavelength 1550.12" configuration options. The framing
> command auto-completes on an EX-series box but the optics-options
> command is hidden.
>
> Couldn't find any definitive references in the product docs.
>
> cheers,
> Dale
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp