[j-nsp] EX-UM-2X4SFP- 2-port 10G SFP+ / 4-port 1G SFP Uplink Module

[Nick Kritsky]

As far as I remember you have to explicitly select 10g or 1g mode on PIC
level for EX uplink module. This automatically rules out any mixed mode
setup.

NK

2012/2/21 Timh Bergström <timh.bergstrom at videoplaza.com>

> On Tue, Feb 21, 2012 at 12:03 PM, Mike Williams
> <mike.williams at comodo.com> wrote:
> > On Tuesday 21 February 2012 08:33:53 Jeff Wheeler wrote:
> >
> > The built in uplink ports in the EX3300. Do they support running 2 at
> 10Gb
> > (for VC) and 2 at 1Gb for regular ethernet?
> > I'm sure I've seen it written that all four ports can be used at 10Gb,
> if true
> > that would support my belief mixed mode operation is supported too.
>
> Afaik two of the four 10Gb ports are pre-configured for VC, the other
> two can be used for ethernet out of the box, or you can use one for VC
> and three for ethernet or the other way round, no problems (at least
> that's what the juniper SE told me when I bought mine).
>
>