[j-nsp] Ex Series VC with *both* high-speed backbone *and* link-aggregation

[Aaron Dewell]

I haven't tried it, but all the docs I read on it suggested that configured
VC ports acted as more ports, not replacements. On our EXs, the normal VC
ports are still available even though we use two 10g for VC. However, we
aren't using them so i can't confirm... But pretty sure it should work.
 On Jan 3, 2012 11:37 AM, "Dave Peters" <dave at terabitsystems.com> wrote:

> Hi all--
>
> This is simple, but I can't find definitive proof online . . .
>
> Can I set up a Juniper EX series virtual chassis using a high-speed
> backbone on one floor of a building and then connect that VC to another
> switch (or two) via link-aggregation on the SFP ports?
>
> I'm not sure you can mix the VC connections, is all.  Can I use both the
> stacking backbone on one floor and the SFP links on another floor in the
> same virtual chassis?
>
> Thanks much.
>
> --
> Dave Peters
> Technical Director
> Terabit Systems
> 2565 3rd Street  #218
> San Francisco, CA  94107
>
> ______________________________**_________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp>
>