[j-nsp] Quick Question About HA Setup

[Gordon Smith]

Commit confirmed does not work in 12.1 (SRX550 cluster), and is a known
issue.
Apparently it will be fixed, but no timeframe has been given  :-(

It will accept a commit confirmed, but when you decide to keep the changes
made and do a commit, you'll get a "file not found" error, and the config
will be rolled back regardless.


-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Clay Haynes
Sent: Tuesday, 17 July 2012 10:08 PM
To: Pavel Lunin
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Quick Question About HA Setup

I believe the command was "configure exclusive" in order to perform a commit
confirmed on a cluster prior to 11.4; however this did have the side effect
of only allowing one user to configure the SRX cluster at a time. Also there
are no guarantees that the rollback would actually work (hence why it was
unsupported).

- Clay






On 7/17/12 6:43 AM, "Pavel Lunin" <plunin at senetsy.ru> wrote:

>
>HmŠ didn't know that, thanks.
>
>And how about to share the unsupported way? (could not realize it 
>myself)
>
>> Commit confirmed came into clusters in 11.4 ...
>>
>> Could always do it is unsupported ways before ... But now you can do 
>> it supported in 11.4rx ...
>>
>
>_______________________________________________
>juniper-nsp mailing list juniper-nsp at puck.nether.net 
>https://puck.nether.net/mailman/listinfo/juniper-nsp


_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp