[j-nsp] Any interest in my script that auto generate nagios configs for juniper devices polled via SNMP?

[Dana Konkin]

Hi Morgan,
It's possible that many will be interested. Go for it! Put it on a blog and
see what happens.
Good luck,
Dana
On Jul 20, 2012 7:39 PM, "Morgan McLean" <wrx230 at gmail.com> wrote:

> I have a script that I've developed which when given a list of hosts will
> poll via snmp and gather:
>
> Interface details
> BGP peers
> OSPF neighbors
> Hardware information
>
> It then has some default behavior and intelligently builds a working nagios
> configuration for the devices, all by itself. There are some configuration
> flags, but the default behavior does quite a lot.
>
> My implementation auto generates around 17,500 checks for 38 devices before
> ignoring access interfaces etc, things I don't care as much about. I'm able
> to generate all of this via my script in under five minutes. I'm assuming
> once I configure the interfaces I want to ignore (a lot) that amount of
> checks would come down significantly.
>
> Some network admins don't know unix or nagios very well. If there is enough
> interest I will put up a page with details on how to setup a quick nagios
> installation, and include details about how to use the script (its very
> easy). I'll probably start maintaining publicly it if there is enough
> interest.
>
> I run an all juniper network at work, so this script is really only
> designed for juniper shops. These files can also augment existing nagios
> configurations, a stand alone installation isn't needed.
>
> Let me know, either publicly or directly please. I've included a few screen
> shots.
>
> http://i.imgur.com/kfh2z.png
>
> http://i.imgur.com/IkVLo.png
>
> http://i.imgur.com/xrSUh.png
>
> Thanks!
> Morgan
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>