[j-nsp] JUNOS mx lag minimum bandwidth

[Addy Mathur]

On Saturday, July 28, 2012, Schahzad Zafar wrote:

> Hi list,
>
> I am not aware of if we can configure LAG  to forward traffic only if
> certin bandwidth (not full links as in minimum links instead line 2.5 G )
> is available.
>
> I was looking at JNCIE work book and some where there was a task to
> configure LAG interface to forward traffic only if there 2.5 G bandwidth is
> available i am only aware of option to have minimum Links to keep the LAG
> up.
>
> Intrestingly show interface ae0 shows "Minimum Links required" as well as
> "Minimum Bandwidth Capacity" too which is more confusing me.
>
> Any one know about it ?


Have you looked into bandwidth-based-metrics?

http://www.juniper.net/techpubs/en_US/junos10.0/information-products/topic-collections/config-guide-routing/routing-dynamically-adjusting-ospf-interface-metrics-based-on-bandwidth.html


>
> --
> Best Regards
> Schahzad
> 0092 - 321 -9001131
>
> Never argue with an idiot, they will just *drag you* down to *their level
> and beat* you with experience.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net <javascript:;>
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>