[j-nsp] reth physical link not enabled

[Ben Boyd]

Did you create the reth interface with:

set chassis cluster reth-count 3

The reth-count needs to be at least 3 since numbering starts at 0. 

Thanks,
Ben Boyd
----------------------
Sent from my iPhone 4s

On Jun 11, 2012, at 5:49, roland DROUAL <roland.droual at paris.iufm.fr> wrote:

> Hello the List,
> 
> I have a problem with an redundant interface reth2.
> I think the configuration is right, but I can't ping the @ IP
> The physical link is up, but the redundant interface is not enabled.
> How can I do, to have the reth2 physical link enabled ?
> 
> Thanks for your help.
> 
> Roland DROUAL
> 
> ============================
> toto at AS-SRX650-01# show interfaces
> ge-6/0/21 {
>    gigether-options {
>        redundant-parent reth2;
>    }
> }
> ge-15/0/21 {
>    gigether-options {
>        redundant-parent reth2;
>    }
> }
> ...
> reth2 {
>    description "802.1Q vers DMZ1";
>    vlan-tagging;
>    redundant-ether-options {
>        redundancy-group 1;
>    }
>    unit 10 {
>        vlan-id 10;
>        family inet {
>            address 193.48.41.193/29;
>        }
>    }
> }
> 
> ==============================
> toto at AS-SRX650-01# run show interfaces
> Physical interface: ge-6/0/21, Enabled, Physical link is Up
>  Interface index: 157, SNMP ifIndex: 299
>  Link-level type: Ethernet, MTU: 1518, Link-mode: Full-duplex, Speed: 1000mbps, BPDU Error: None, MAC-REWRITE Error: None,
>  Loopback: Disabled, Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled, Remote fault: Online
>  Device flags   : Present Running
>  Interface flags: SNMP-Traps Internal: 0x0
>  CoS queues     : 8 supported, 8 maximum usable queues
>  Current address: 00:26:88:e2:a5:bd, Hardware address: 00:26:88:e2:a5:bd
>  Last flapped   : 2012-06-08 01:35:48 UTC (1d 16:47 ago)
>  Input rate     : 0 bps (0 pps)
>  Output rate    : 0 bps (0 pps)
>  Active alarms  : None
>  Active defects : None
>  Interface transmit statistics: Disabled
> 
>  Logical interface ge-6/0/21.10 (Index 98) (SNMP ifIndex 597)
>    Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x8100.10 ]  Encapsulation: ENET2
>    Input packets : 0
>    Output packets: 0
>    Security: Zone: Null
>    Protocol aenet, AE bundle: reth2.10   Link Index: 0
> 
>  Logical interface ge-6/0/21.32767 (Index 97) (SNMP ifIndex 578)
>    Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x0000.0 ]  Encapsulation: ENET2
>    Input packets : 0
>    Output packets: 0
>    Security: Zone: Null
>    Protocol aenet, AE bundle: reth2.32767   Link Index: 0
> 
> 
> But I can't see the interface reth2. I should see:
> - "Physical interface: reth2, Enabled, Physical link is Up ...."
> - "  Logical interface reth2.10 ...."
> and I don't see them. the physical interface reth2 seems to be not enabled.
> 
> =================================
> And so, there is no route for the range IP 193.48.41.192/29, via reth2.10
> 
> toto at AS-SRX650-01# run show route
> 
> inet.0: 11 destinations, 11 routes (10 active, 0 holddown, 1 hidden)
> + = Active Route, - = Last Active, * = Both
> 
> 10.1.3.0/29        *[Direct/0] 1d 18:58:31
> > via reth0.201
> 10.1.3.1/32        *[Local/0] 1d 18:58:31
>                      Local via reth0.201
> 10.1.4.0/29        *[Direct/0] 1w3d 20:07:04
> > via reth1.100
> 10.1.4.2/32        *[Local/0] 1w3d 20:07:04
>                      Local via reth1.100
> 10.96.0.0/11       *[Static/5] 1w1d 16:00:44
> > to 10.1.4.1 via reth1.100
> 10.115.0.0/16      *[Direct/0] 1w3d 21:08:07
> > via fxp0.0
> 10.115.7.11/32     *[Local/0] 1w3d 21:08:07
>                      Local via fxp0.0
> 10.192.0.0/11      *[Static/5] 1d 18:58:31
> > to 10.1.3.2 via reth0.201
> 195.221.125.204/30 *[Direct/0] 1d 19:22:26
> > via reth0.955
> 195.221.125.206/32 *[Local/0] 1d 19:56:26
>                      Local via reth0.955
> ================================
> The interface reth2 is in a security zone:
> 
>        security-zone DMZ {
>            host-inbound-traffic {
>                system-services {
>                    all;
>                }
>                protocols {
>                    all;
>                }
>            }
>            interfaces {
>                reth2.10;
>            }
>        }
>    }
> }
> 
> 
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp