[j-nsp] reth physical link not enabled

[roland DROUAL]

Thank you.
I typed:
set chassis cluster reth-count 5
and my config is right now.

I lost my chassis-cluster 2 weeks ago with 5 reth, and I don't know why 
the new config was with reth-count = 2

It's OK now,

Thank you

Roland DROUAL



Le 11/06/2012 14:08, Clay Haynes a écrit :

Can you run a "show configuration chassis"? I'm guessing your reth-count
is set too low (should be reth-count 3).
- Clay


Le 11/06/2012 14:06, Ben Boyd a écrit :
> Did you create the reth interface with:
>
> set chassis cluster reth-count 3
>
> The reth-count needs to be at least 3 since numbering starts at 0.
>
> Thanks,
> Ben Boyd
> ----------------------
> Sent from my iPhone 4s
>
> On Jun 11, 2012, at 5:49, roland DROUAL<roland.droual at paris.iufm.fr>  wrote:
>
>> Hello the List,
>>
>> I have a problem with an redundant interface reth2.
>> I think the configuration is right, but I can't ping the @ IP
>> The physical link is up, but the redundant interface is not enabled.
>> How can I do, to have the reth2 physical link enabled ?
>>
>> Thanks for your help.
>>
>> Roland DROUAL
>>
>> ============================
>> toto at AS-SRX650-01# show interfaces
>> ge-6/0/21 {
>>     gigether-options {
>>         redundant-parent reth2;
>>     }
>> }
>> ge-15/0/21 {
>>     gigether-options {
>>         redundant-parent reth2;
>>     }
>> }
>> ...
>> reth2 {
>>     description "802.1Q vers DMZ1";
>>     vlan-tagging;
>>     redundant-ether-options {
>>         redundancy-group 1;
>>     }
>>     unit 10 {
>>         vlan-id 10;
>>         family inet {
>>             address 193.48.41.193/29;
>>         }
>>     }
>> }
>>
>> ==============================
>> toto at AS-SRX650-01# run show interfaces
>> Physical interface: ge-6/0/21, Enabled, Physical link is Up
>>   Interface index: 157, SNMP ifIndex: 299
>>   Link-level type: Ethernet, MTU: 1518, Link-mode: Full-duplex, Speed: 1000mbps, BPDU Error: None, MAC-REWRITE Error: None,
>>   Loopback: Disabled, Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled, Remote fault: Online
>>   Device flags   : Present Running
>>   Interface flags: SNMP-Traps Internal: 0x0
>>   CoS queues     : 8 supported, 8 maximum usable queues
>>   Current address: 00:26:88:e2:a5:bd, Hardware address: 00:26:88:e2:a5:bd
>>   Last flapped   : 2012-06-08 01:35:48 UTC (1d 16:47 ago)
>>   Input rate     : 0 bps (0 pps)
>>   Output rate    : 0 bps (0 pps)
>>   Active alarms  : None
>>   Active defects : None
>>   Interface transmit statistics: Disabled
>>
>>   Logical interface ge-6/0/21.10 (Index 98) (SNMP ifIndex 597)
>>     Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x8100.10 ]  Encapsulation: ENET2
>>     Input packets : 0
>>     Output packets: 0
>>     Security: Zone: Null
>>     Protocol aenet, AE bundle: reth2.10   Link Index: 0
>>
>>   Logical interface ge-6/0/21.32767 (Index 97) (SNMP ifIndex 578)
>>     Flags: SNMP-Traps 0x0 VLAN-Tag [ 0x0000.0 ]  Encapsulation: ENET2
>>     Input packets : 0
>>     Output packets: 0
>>     Security: Zone: Null
>>     Protocol aenet, AE bundle: reth2.32767   Link Index: 0
>>
>>
>> But I can't see the interface reth2. I should see:
>> - "Physical interface: reth2, Enabled, Physical link is Up ...."
>> - "  Logical interface reth2.10 ...."
>> and I don't see them. the physical interface reth2 seems to be not enabled.
>>
>> =================================
>> And so, there is no route for the range IP 193.48.41.192/29, via reth2.10
>>
>> toto at AS-SRX650-01# run show route
>>
>> inet.0: 11 destinations, 11 routes (10 active, 0 holddown, 1 hidden)
>> + = Active Route, - = Last Active, * = Both
>>
>> 10.1.3.0/29        *[Direct/0] 1d 18:58:31
>>> via reth0.201
>> 10.1.3.1/32        *[Local/0] 1d 18:58:31
>>                       Local via reth0.201
>> 10.1.4.0/29        *[Direct/0] 1w3d 20:07:04
>>> via reth1.100
>> 10.1.4.2/32        *[Local/0] 1w3d 20:07:04
>>                       Local via reth1.100
>> 10.96.0.0/11       *[Static/5] 1w1d 16:00:44
>>> to 10.1.4.1 via reth1.100
>> 10.115.0.0/16      *[Direct/0] 1w3d 21:08:07
>>> via fxp0.0
>> 10.115.7.11/32     *[Local/0] 1w3d 21:08:07
>>                       Local via fxp0.0
>> 10.192.0.0/11      *[Static/5] 1d 18:58:31
>>> to 10.1.3.2 via reth0.201
>> 195.221.125.204/30 *[Direct/0] 1d 19:22:26
>>> via reth0.955
>> 195.221.125.206/32 *[Local/0] 1d 19:56:26
>>                       Local via reth0.955
>> ================================
>> The interface reth2 is in a security zone:
>>
>>         security-zone DMZ {
>>             host-inbound-traffic {
>>                 system-services {
>>                     all;
>>                 }
>>                 protocols {
>>                     all;
>>                 }
>>             }
>>             interfaces {
>>                 reth2.10;
>>             }
>>         }
>>     }
>> }
>>
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp