[j-nsp] Strange log messages with a new SFP Module.

[Ihsan Junaidi Ibrahim]

I've had those messages too when I plugged in the SFPs. Some SFP brands that used to work on GE PICs and MICs on M/T/MX series on 10.4 now complains of the same error logs.

I can't recall the specific EEPROM ID offhand but maybe you can jog my memory by running show chassis pic on the slot.

On Jun 20, 2012, at 10:24 PM, Gustavo Santos wrote:

> Hi,
> 
> We just bough some SFP-LX and we're getting these log messages below.
> 
> Jun 20 11:18:53.863 2012  BRD01 tfeb0 PQ3_IIC(WR): no target ack on byte 0
> (wait spins 3)
> Jun 20 11:18:53.864 2012  BRD01 tfeb0 PQ3_IIC(WR): I/O error
> (i2c_stat=0xa3, i2c_ctl[1]=0xb0, bus_addr=0x51)
> Jun 20 11:18:53.884 2012  BRD01 tfeb0 mic_sfp_pca9548_swtbl_clean: Reset
> MUX to SFP ports
> Jun 20 11:18:53.975 2012  BRD01 tfeb0 Reset media mux for mic slot 1
> 
> Anyone seen this before?
> I  changed for other LX modules and I allways get those messages.
> 
> The router is a MX80-5 running Junos 12.1
> 
> 
> Gustavo Santos
> Analista de Redes
> CCNA , MTCNA , MTCRE, MTCINE, JUNCIA-ER
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp