[j-nsp] Strange log messages with a new SFP Module.

[Gustavo Santos]

Thanks for your answer.

All of a sudden the log message stop to show on  "show log messages".

The module is the one below.


PIC port information:
                          Fiber                    Xcvr vendor
  Port  Cable type        type  Xcvr vendor        part number
Wavelength
  2     GIGE 1000LX10     SM    OPNEXT INC         TRF5736AALB214    1310
nm

        Xcvr vendor
        firmware version
        0.0
Gustavo Santos
Analista de Redes
CCNA , MTCNA , MTCRE, MTCINE, JUNCIA-ER



2012/6/22 Ihsan Junaidi Ibrahim <ihsan.junaidi at gmail.com>

> I've had those messages too when I plugged in the SFPs. Some SFP brands
> that used to work on GE PICs and MICs on M/T/MX series on 10.4 now
> complains of the same error logs.
>
> I can't recall the specific EEPROM ID offhand but maybe you can jog my
> memory by running show chassis pic on the slot.
>
> On Jun 20, 2012, at 10:24 PM, Gustavo Santos wrote:
>
> > Hi,
> >
> > We just bough some SFP-LX and we're getting these log messages below.
> >
> > Jun 20 11:18:53.863 2012  BRD01 tfeb0 PQ3_IIC(WR): no target ack on byte
> 0
> > (wait spins 3)
> > Jun 20 11:18:53.864 2012  BRD01 tfeb0 PQ3_IIC(WR): I/O error
> > (i2c_stat=0xa3, i2c_ctl[1]=0xb0, bus_addr=0x51)
> > Jun 20 11:18:53.884 2012  BRD01 tfeb0 mic_sfp_pca9548_swtbl_clean: Reset
> > MUX to SFP ports
> > Jun 20 11:18:53.975 2012  BRD01 tfeb0 Reset media mux for mic slot 1
> >
> > Anyone seen this before?
> > I  changed for other LX modules and I allways get those messages.
> >
> > The router is a MX80-5 running Junos 12.1
> >
> >
> > Gustavo Santos
> > Analista de Redes
> > CCNA , MTCNA , MTCRE, MTCINE, JUNCIA-ER
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>