[j-nsp] EX4200 Virtual Chassis Uplink Requirements - Extended VCT / VCCP

[Sascha Luck]

On Sun, Jun 24, 2012 at 09:47:22PM -0700, Doug Hanks wrote:
>The MX implementation of VCCP uses standard 802.1Q with a vlan-id of 4094.
> I'm sure the EX is the same as well.  The maximum latency is 100ms.

I don't know about the MX but this whitepaper:
http://www.juniper.net/us/en/local/pdf/implementation-guides/8010045-en.pdf
says that EX VC uses non-standard MAC framing. It's the only bit of 
documentation that mentiones that, though