[j-nsp] Multiple destinations for inet6-backup-router

[Ihsan Junaidi Ibrahim]

Hi folks,

Is anyone able to install multiple destinations into their inet6-backup-router stanza?

No matter what i do, I can't seem to install more than one destinations into the backup router.

It's an SRX240H running 11.4S3.

ihsan at acs01-kul-node0# set system inet6-backup-router 2400:3700:20:1::1 destination 2400:3700:20::/64    

{primary:node0}[edit]
ihsan at acs01-kul-node0# show system inet6-backup-router       
2400:3700:20:1::1 destination 2400:3700:20::/64;

{primary:node0}[edit]
ihsan at acs01-kul-node0# set system inet6-backup-router 2400:3700:20:1::1 destination 2400:3700:20:1::/64  

{primary:node0}[edit]
ihsan at acs01-kul-node0# show system inet6-backup-router                                                     
2400:3700:20:1::1 destination 2400:3700:20:1::/64;

{primary:node0}[edit]

No such problems with IPv4 backup-router config though.

ihsan at acs01-kul-node0# show system backup-router 
10.0.1.1 destination [ 10.0.0.0/24 10.0.3.0/24 10.0.4.0/24 ];