[j-nsp] VPLS Between 2 Routers

[Craig Whitmore]

Yes.. LDP on interfaces..

run show route table inet.3

inet.3: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both

X.X.X.X/32     *[LDP/9] 00:45:39, metric 1 (X.X.X.X = Loopback of remote
router)
                    > to Y.Y.Y.Y via vlan.22 (Y.Y.Y.Y = ethernet address
of remote router towards local router)







On 2/03/12 3:47 PM, "davidtball at gmail.com" <davidtball at gmail.com> wrote:

>  LDP should be enough, as long as you have it enabled on your loopbacks
>too.  What does a 'sh route table inet.3' look like? You'll need
>something in there with a valid next hop to the egress PE.
>
>David
>