[j-nsp] VPLS Between 2 Routers

[Bjørn Tore]

Den 02.03.2012 01:06, skrev Craig Whitmore:
> Hi there
>
> I am pretty new to MPLS but what I'm trying to do is set up a L2 Tunnel
> between 2 Routers  via VPLS. The idea is the customer can plug a TRUNK port
> at both ends and run whatever VLANS they want between them . Maybe there is
> a easier way to do it. There are LOTS of examples in LOTS of different
> places on how VPLS should be set up and all are slightly different. I cannot
> get any data thru the VPLS connection..

FWIW - here is a working config for 3 routers. I use a different 
encapsulation;

interfaces {
     ge-1/3/0 {
         unit 10 {
             description "My vpls";
             encapsulation vlan-vpls;
             vlan-id 10;
         }
     }
}
routing-instances {
     My VPLS {
         instance-type vpls;
         interface ge-1/3/0.10;
         route-distinguisher 11111:001000010;
         vrf-target target:11111:0010000;
         protocols {
             vpls {
                 site-range 3;
                 site MY_ROUTER {
                     site-identifier 1;
                 }
             }
         }
     }
}

-- 
Bjørn Tore