[j-nsp] Multihomed VPLS

Ben Dale bdale at comlinx.com.au
Tue Mar 6 06:10:05 EST 2012


On 06/03/2012, at 7:38 PM, Jose María Carrera wrote:

> hello there
> 
> Is there anyway to tear down the interface when the interface included in the VPLS is not directly connected to the CE, but to one switch in between?
> If the setup is as follows
> 
> PE------SW------CE
> 
> If the interface between SW and CE goes down, the interface between PE and SW is still up and the multihomed VPLS does not switchover
> 
> Do you know if there's a way sort this out?

If the switch supports it (like EX or many others), use OAM / link-fault-management.


More information about the juniper-nsp mailing list