[j-nsp] Multihomed VPLS

[Shiva Shankar]

In the later JUNOS versions, whle using CFM model of OAM, we an option of
"interface-down" in action-profile, which can bring down the interface is
CFM is down. I've not personally tested, but heard it seems to work.

Cheers

2012/3/6 Ben Dale <bdale at comlinx.com.au>

>
> On 06/03/2012, at 7:38 PM, Jose María Carrera wrote:
>
> > hello there
> >
> > Is there anyway to tear down the interface when the interface included
> in the VPLS is not directly connected to the CE, but to one switch in
> between?
> > If the setup is as follows
> >
> > PE------SW------CE
> >
> > If the interface between SW and CE goes down, the interface between PE
> and SW is still up and the multihomed VPLS does not switchover
> >
> > Do you know if there's a way sort this out?
>
> If the switch supports it (like EX or many others), use OAM /
> link-fault-management.
>  _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>