[j-nsp] adding a ex4200px to a ex4200 chassis

[Pappas, AJ]

Grr  I was hoping that was not the answer. Thank you. 

Sent from my iPhone

On Mar 13, 2012, at 2:59 PM, "Tim Jackson" <jackson.tim at gmail.com> wrote:

> http://kb.juniper.net/InfoCenter/index?page=content&id=KB22001&cat=JUNOS&actp=LIST
> 
> You'll have to run 11.2R1 or later..
> 
> --
> Tim
> 
> On Tue, Mar 13, 2012 at 2:05 PM, Pappas, AJ <apappas at ottawaregional.org> wrote:
>> Anyone have any issues or comments or concerns about adding a new
>> ex4200px to an existing chassis of ex4200's?  I know that to add a new
>> switch to an existing chassis, you must be on the same code level.
>> Should I downgrade the new ex4200px and put it to the same level as what
>> I have now?
>> 
>> 
>> 
>> AJ Pappas
>> 
>> Network Administrator
>> 
>> *  apappas at ottawaregional.org <mailto:apappas at ottawaregional.org>
>> " http://www.ottawaregional.org <http://www.ottawaregional.org/>
>> 
>> ( 815-431-5180
>> 
>> Ottawa Regional Hospital & Healthcare Center
>> , 1100 E. Norris Dr., Ottawa, IL 61350
>> 
>> 
>> 
>> P Please consider the environment before printing this e-mail and any
>> attachments.
>> 
>> Confidentiality Notice:  This e-mail may contain confidential
>> information.  The information is intended only for the use of the
>> intended recipient named above.  If you are not the intended recipient,
>> you are hereby notified that any disclosure, copying, distribution, or
>> the taking of any action in reliance on the contents of this telecopied
>> information, except its direct delivery to the intended recipient named
>> above, is strictly prohibited.  If you have received this e-mail in
>> error, please notify the sender and delete the e-mail.
>> 
>> 
>> 
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp