[j-nsp] adding a ex4200px to a ex4200 chassis

[Tim Jackson]

http://kb.juniper.net/InfoCenter/index?page=content&id=KB22001&cat=JUNOS&actp=LIST

You'll have to run 11.2R1 or later..

--
Tim

On Tue, Mar 13, 2012 at 2:05 PM, Pappas, AJ <apappas at ottawaregional.org> wrote:
> Anyone have any issues or comments or concerns about adding a new
> ex4200px to an existing chassis of ex4200's?  I know that to add a new
> switch to an existing chassis, you must be on the same code level.
> Should I downgrade the new ex4200px and put it to the same level as what
> I have now?
>
>
>
> AJ Pappas
>
> Network Administrator
>
> *  apappas at ottawaregional.org <mailto:apappas at ottawaregional.org>
> " http://www.ottawaregional.org <http://www.ottawaregional.org/>
>
> ( 815-431-5180
>
> Ottawa Regional Hospital & Healthcare Center
> , 1100 E. Norris Dr., Ottawa, IL 61350
>
>
>
> P Please consider the environment before printing this e-mail and any
> attachments.
>
> Confidentiality Notice:  This e-mail may contain confidential
> information.  The information is intended only for the use of the
> intended recipient named above.  If you are not the intended recipient,
> you are hereby notified that any disclosure, copying, distribution, or
> the taking of any action in reliance on the contents of this telecopied
> information, except its direct delivery to the intended recipient named
> above, is strictly prohibited.  If you have received this e-mail in
> error, please notify the sender and delete the e-mail.
>
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp