[j-nsp] bgp ipv6 route problem

Kazmierczak, Tomasz (NSN - US/Irving) tomasz.kazmierczak at nsn.com
Sun Mar 18 15:33:39 EDT 2012


Pls send full config from these 2x boxes. 

 

 

From: ext bruno [mailto:bruno.juniper at gmail.com] 
Sent: Saturday, March 17, 2012 8:08 AM
To: Per Granath
Cc: Kazmierczak, Tomasz (NSN - US/Irving); juniper-nsp
Subject: Re: [j-nsp] bgp ipv6 route problem

 

 

i am use 10.4R9.2. it did change it to ::ffff when i advertise the bgp
route as next-hop .  when i add a ipv6 route on interface,

the router receive the route from peer, not ignore any more.  BUT is it
the right way we do ? any other solution?  any advice is welcome.

lab at test# run show version 

Hostname: test

Model: olive

JUNOS Base OS boot [10.4R9.2]

JUNOS Base OS Software Suite [10.4R9.2]

JUNOS Kernel Software Suite [10.4R9.2]

JUNOS Crypto Software Suite [10.4R9.2]

JUNOS Packet Forwarding Engine Support (M/T Common) [10.4R9.2]

JUNOS Packet Forwarding Engine Support (M20/M40) [10.4R9.2]

 

	

 

 

------------------ Original ------------------

From:  "Per Granath"<per.granath at gcc.com.cy>;

Date:  Sat, Mar 17, 2012 02:42 PM

To:  "bruno"<bruno.juniper at gmail.com>; 

Cc:  "Kazmierczak, Tomasz (NSN -
US/Irving)"<tomasz.kazmierczak at nsn.com>;
"juniper-nsp"<juniper-nsp at puck.nether.net>; 

Subject:  Re: [j-nsp] bgp ipv6 route problem

 

Are you sure you are not running Junos 11.x ?

I said before it was in 10.4 that mapped addresses changed from :: to
::ffff: but it was probably from 11.1. Been some time since I looked
into it.

Have a look at the Day One book Advanced IPv6 Configuration for an
example with ::ffff:.



More information about the juniper-nsp mailing list