[j-nsp] Bridge Domain/IRB on MX80

[Saba Sumsam]

Hello,
I am receiving VLAN550 on MX80 (PE) via an LSP. The configuration of the
CE-facing interface is as follows:

*ae1 {
        flexible-vlan-tagging;
       encapsulation flexible-ethernet-services;

unit 550 {
           encapsulation vlan-ccc;
            vlan-id-range 550;
           family ccc;
        } I would like to create an L3 Interface on the MX for this VLAN.
Tried the following configuration, which didn't work (was unable to ping
the interface IP from a PC connected to the remote CE switch): **bridge-domains
{
   VLAN550 {
        vlan-id 550;

irb
unit 550 {
           family inet {
                address 192.168.254.2/24 <http://192.168.254.200/24>
*
*
*
*Any suggestions, please? *
Regards,

*Saba Sumsam*
*Network Engineer - Level 2*
eintellego Pty Ltd
saba at eintellego.net <ali at eintellego.net> ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)424753773

facebook.com/eintellego
PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM
* *