[j-nsp] ipv6 autoconfiguration and ::/0

[Pavel Lunin]

How about a generated default route on r2?
08.11.2012 12:18 пользователь "Lukasz Martyniak" <lmartyniak at man.szczecin.pl>
написал:

> Hi all
>
> Is it possible to configure router with ::/0 same way as hosts are
> configured with IPv6 stateless autoconfiguration ?
>
> This is what i would like to achieve:
>
> R1 --- R2
>
> I have eBGP between R1 and R2. I can advertise only one ipv6 prefix (but
> not ::/0) to R2 and i can not configure R2. The goal is to force R2 to send
> all traffic by R1 as a default.
>
> Can "router-advertisement" in juniper do the trick ?
>
> Best Lukasz
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>