[j-nsp] Juniper SRX 240 Clustering

[Bikash Bhattarai]

Dear Westerlund,

Thank you for your email. When I configure clustering all the configuration
automatically moves to apply-groups [ node0 node1 ].


Regards,
Bikash Bhattarai | Dristi Tech (P.) Ltd | +977 9851039710 |
www.dristi.com.np
Lazimpat, Kathmandu |Tel  977 1 4427949  |  Fax 977 1 4410385*

*




On Sun, Nov 25, 2012 at 2:07 AM, Per Westerlund <p1 at westerlund.se> wrote:

> Begin with replacing 'apply-groups [ node0 node1 ];' with 'apply-groups
> "${NODE}";', the idea is that the two nodes should have different
> configurations. And while you are making changes, move the section on
> "services" from "groups node0" to the global configuration, else it will
> only work when you are connecting to node0, not node1.
>
> /Per Westerlund
>
>
> 24 nov 2012 kl. 18:43 skrev Bikash Bhattarai:
>
> > Dear all,
> >
> > I have just configured two SRX 240 in clustering. One firewall is working
> > as primary and another is working as secondary. When primary router wan
> > interface fails the secondary router becomes primary. But after fail-over
> > network becomes unreachable even from LAN side.
> >
> > I have attached the whole configuration.I have configured as per Juniper
> > documentation. It will be very helpful if anyone point me if I am missing
> > something.
> >
> > Regards,
> > Bikash Bhattarai | Dristi Tech (P.) Ltd | +977 9851039710 |
> > www.dristi.com.np
> > Lazimpat, Kathmandu |Tel  977 1 4427949  |  Fax 977 1 4410385*
> >
> > *
> > <Cluster-Config.txt>_______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>