[j-nsp] Error while validating a JunOS

[OBrien, Will]

no-validate

That is, request system software install no-validate blah


On Nov 29, 2012, at 7:25 PM, Ali Sumsam wrote:

> Hi,
> I have a brand new MX5 router for one of my customers. The only
> configuration I have on this router is
> 
> 1, one login name and password
> 2, IP address on FXP0
> 3, telnet and ftp service.
> 
> I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is the
> recommended one for MX5 on juniper site.
> 
> 
> When i try to validate this JunOS, it gives me following error.
> 
> mgd: error: configuration check-out failed
> Validation failed
> WARNING: Current configuration not compatible with
> /var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz
> 
> Any suggestion. Can I just ignore this error and live with it?
> 
> Regards,
> 
> 
> *Ali Sumsam CCIE*
> *Network Engineer - Level 3*
> eintellego Pty Ltd
> ali at eintellego.net ; www.eintellego.net
> 
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
> 
> Cell +61 (0)410 603 531
> 
> facebook.com/eintellego
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
> 
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp