[j-nsp] Error while validating a JunOS

[Ali Sumsam]

but that will kinda bypass it.
Should i worry about it or just ignore it?

Regards,
*Ali Sumsam CCIE*
*Network Engineer - Level 3*
eintellego Pty Ltd
ali at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)410 603 531

facebook.com/eintellego
PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM



On Fri, Nov 30, 2012 at 12:30 PM, OBrien, Will <ObrienH at missouri.edu> wrote:

> no-validate
>
> That is, request system software install no-validate blah
>
>
> On Nov 29, 2012, at 7:25 PM, Ali Sumsam wrote:
>
> > Hi,
> > I have a brand new MX5 router for one of my customers. The only
> > configuration I have on this router is
> >
> > 1, one login name and password
> > 2, IP address on FXP0
> > 3, telnet and ftp service.
> >
> > I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is
> the
> > recommended one for MX5 on juniper site.
> >
> >
> > When i try to validate this JunOS, it gives me following error.
> >
> > mgd: error: configuration check-out failed
> > Validation failed
> > WARNING: Current configuration not compatible with
> > /var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz
> >
> > Any suggestion. Can I just ignore this error and live with it?
> >
> > Regards,
> >
> >
> > *Ali Sumsam CCIE*
> > *Network Engineer - Level 3*
> > eintellego Pty Ltd
> > ali at eintellego.net ; www.eintellego.net
> >
> > Phone: 1300 753 383 ; Fax: (+612) 8572 9954
> >
> > Cell +61 (0)410 603 531
> >
> > facebook.com/eintellego
> > PO Box 7726, Baulkham Hills, NSW 1755 Australia
> >
> > The Experts Who The Experts Call
> > Juniper - Cisco – Brocade - IBM
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
>
>