[j-nsp] Error while validating a JunOS

[OBrien, Will]

I've seen it complain about https certs before in pre-install, but with a complete install when you're not using it - it no longer complains.

Probably something like that.

On Nov 29, 2012, at 8:02 PM, Ali Sumsam <ali+junipernsp at eintellego.net>
 wrote:

> and here comes the interesting part. If I try to validate after i have
> upgraded the router to the new JunOS. It just validates successfully.
> 
> Regards,
> *Ali Sumsam CCIE*
> *Network Engineer - Level 3*
> eintellego Pty Ltd
> ali at eintellego.net ; www.eintellego.net
> 
> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
> 
> Cell +61 (0)410 603 531
> 
> facebook.com/eintellego
> PO Box 7726, Baulkham Hills, NSW 1755 Australia
> 
> The Experts Who The Experts Call
> Juniper - Cisco – Brocade - IBM
> 
> 
> 
> On Fri, Nov 30, 2012 at 12:36 PM, Stacy W. Smith <stacy at acm.org> wrote:
> 
>> Can you share the current version and existing config? If it really is as
>> simple as you say, then I would not expect a problem, but it would be
>> interesting to investigate why it's complaining.
>> 
>> --Stacy
>> 
>> On Nov 29, 2012, at 6:33 PM, Ali Sumsam <ali+junipernsp at eintellego.net>
>> wrote:
>>> but that will kinda bypass it.
>>> Should i worry about it or just ignore it?
>>> 
>>> Regards,
>>> *Ali Sumsam CCIE*
>>> *Network Engineer - Level 3*
>>> eintellego Pty Ltd
>>> ali at eintellego.net ; www.eintellego.net
>>> 
>>> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>>> 
>>> Cell +61 (0)410 603 531
>>> 
>>> facebook.com/eintellego
>>> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>>> 
>>> The Experts Who The Experts Call
>>> Juniper - Cisco – Brocade - IBM
>>> 
>>> 
>>> 
>>> On Fri, Nov 30, 2012 at 12:30 PM, OBrien, Will <ObrienH at missouri.edu>
>> wrote:
>>> 
>>>> no-validate
>>>> 
>>>> That is, request system software install no-validate blah
>>>> 
>>>> 
>>>> On Nov 29, 2012, at 7:25 PM, Ali Sumsam wrote:
>>>> 
>>>>> Hi,
>>>>> I have a brand new MX5 router for one of my customers. The only
>>>>> configuration I have on this router is
>>>>> 
>>>>> 1, one login name and password
>>>>> 2, IP address on FXP0
>>>>> 3, telnet and ftp service.
>>>>> 
>>>>> I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is
>>>> the
>>>>> recommended one for MX5 on juniper site.
>>>>> 
>>>>> 
>>>>> When i try to validate this JunOS, it gives me following error.
>>>>> 
>>>>> mgd: error: configuration check-out failed
>>>>> Validation failed
>>>>> WARNING: Current configuration not compatible with
>>>>> /var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz
>>>>> 
>>>>> Any suggestion. Can I just ignore this error and live with it?
>>>>> 
>>>>> Regards,
>>>>> 
>>>>> 
>>>>> *Ali Sumsam CCIE*
>>>>> *Network Engineer - Level 3*
>>>>> eintellego Pty Ltd
>>>>> ali at eintellego.net ; www.eintellego.net
>>>>> 
>>>>> Phone: 1300 753 383 ; Fax: (+612) 8572 9954
>>>>> 
>>>>> Cell +61 (0)410 603 531
>>>>> 
>>>>> facebook.com/eintellego
>>>>> PO Box 7726, Baulkham Hills, NSW 1755 Australia
>>>>> 
>>>>> The Experts Who The Experts Call
>>>>> Juniper - Cisco – Brocade - IBM
>>>>> _______________________________________________
>>>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>>> 
>>>> 
>>> _______________________________________________
>>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>> 
>> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp