[j-nsp] Error while validating a JunOS

Alex Arseniev alex.arseniev at gmail.com
Fri Nov 30 04:27:26 EST 2012


Jinstall validates both current _AND_ rescue config.
Check if you have rescue config set and if yes then overwrite it with 
current config
request system config rescue save
HTH
Thanks
Alex


----- Original Message ----- 
From: "Ali Sumsam" <ali+junipernsp at eintellego.net>
To: <juniper-nsp at puck.nether.net>
Sent: Friday, November 30, 2012 1:25 AM
Subject: [j-nsp] Error while validating a JunOS


Hi,
I have a brand new MX5 router for one of my customers. The only
configuration I have on this router is

1, one login name and password
2, IP address on FXP0
3, telnet and ftp service.

I have uploaded Junos jinstall-ppc-11.2R5.4-export-signed.tgz, which is the
recommended one for MX5 on juniper site.


When i try to validate this JunOS, it gives me following error.

mgd: error: configuration check-out failed
Validation failed
WARNING: Current configuration not compatible with
/var/tmp/jinstall-ppc-11.2R5.4-export-signed.tgz

Any suggestion. Can I just ignore this error and live with it?

Regards,


*Ali Sumsam CCIE*
*Network Engineer - Level 3*
eintellego Pty Ltd
ali at eintellego.net ; www.eintellego.net

Phone: 1300 753 383 ; Fax: (+612) 8572 9954

Cell +61 (0)410 603 531

facebook.com/eintellego
PO Box 7726, Baulkham Hills, NSW 1755 Australia

The Experts Who The Experts Call
Juniper - Cisco – Brocade - IBM
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list