[j-nsp] Routing Instance BGP Full Routing High Memory persists

[Giuliano Medalha]

People,

We are doing some BGP tests using routing-instances on MX5-T-DC routers.

We have created a routing-instance to receive 3 full routing inet.0 tables.

The master routing has 3 majors full routing tables too.

Before the tests we check the RE percentage of using memory ... using:

Router> show chassis routing engine

It show 47% usage.

After the creation of the routing-instance (type virtual-router) - named
TEST  we could receive more 3 full routing tables on the TEST.inet.0 table

Using the same command is show to us:

Router> show chassis routing engine

87% memory utilization

After we remove the routing-instance configuration with a commit command in
sequence ... it still shows the same 87% of memory utilization

It this procedure is correct ?    Is it any update command to clear the
memory allocation without disrupting forwarding services ?

Can you please give me some feedback about it ?

Did anyone see it before ?

Thanks a lot,

Giuliano