[j-nsp] Creating VC using Uplink ports (VCE) on ex-4200

[Rehan Rafi]

Hello Abdullah,

We configured them in one of project and VC works pretty fine using
uplinks. You are right, you will need the fiber module either 2x XFP or 4x
SFP depending upon requirement.


On Sun, Sep 30, 2012 at 12:09 PM, Abdullah Baheer
<abdullahbaheer at yahoo.com>wrote:

> Hi Experts,
> We have two ex-4200 switches placed in two buildings, 400 to 500 meters
> apart.The switches are connected through a Trunk interface (through a fiber
> link and media-converters on both sides)
> We are thinking of running VC between these switches.As per my
> understanding I will need two uplink modules (2x XFP, or 4x SFP), and XFPs
> or SFPs, I guess I need at least two links for redundancy.
> Has anyone experienced running VC using uplink ports, using 1G ports or
> 10G ports, is there anything I need to watch for, is it a reliable/workable
> solution?
> Appreciate your inputs.
> ThanksAbdullah Baheer (JNCIE-M # 1402)
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 

Regards,

Rehan Rafi