[j-nsp] pic has no CoS queuing

[Caillin Bathern]

Hi Lukasz,

It looks like you only have a port queuing DPC (-R) not a H-QoS DPC
(-R-Q or -R-EQ).  Without the -Q/-EQ DPCs I do not believe you can
configure the per-unit COS functions.

Cheers,
Caillin

-----Original Message-----
From: juniper-nsp-bounces at puck.nether.net
[mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of Lukasz
Trabinski
Sent: Tuesday, 9 October 2012 9:44 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] pic has no CoS queuing

Hi

I trying to configure shaping-rate on logical 10Gbit/s interface:


xxx at xxx# show class-of-service interfaces xe-3/0/0 unit 591 shaping-rate
1k;

xxx at xxx# show interfaces xe-3/0/0 per-unit-scheduler per-unit-scheduler;


What I'm doing wrong?

xxx at xxx# commit check
[edit class-of-service interfaces xe-3/0/0 unit 591]
   'shaping-rate'
     cannot configure bandwidth (pic has no CoS queuing)
error: configuration check-out failed


Hardware is:

FPC 3            REV 17   750-021566   YP4998            DPCE 4x 10GE R
   CPU            REV 04   710-022351   YN3030            DPC PMB
   PIC 0                   BUILTIN      BUILTIN           1x
10GE(LAN/WAN)

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Message  protected by MailGuard: e-mail anti-virus, anti-spam and
content filtering.http://www.mailguard.com.au/mg