[j-nsp] CCC on EX, link state propagation

[Benny Amorsen]

I am considering building a very simple setup with a number of ethernet
interfaces on one switch each CCC-tunnelled through a common fiber to
another switch. I.e. simply emulating a typical ethernet CWDM using
EoMPLS.

One feature which would be very handy is link state propagation across
those EOMPLS links. Ideally, if the fiber breaks, the ports at each end
go down so the equipment at each end quickly become aware of the break.
Even better if loss of link on a port at one end also shuts down the
link at the other end.

Can the EX series do that? I'm thinking of the EX4550 in particular, but
information about other EX-switches is welcome as well.


/Benny