[j-nsp] CCC on EX, link state propagation

[Tim Jackson]

MX has a gig ether option for doing this. I'd check and see if EX4550 does.
EX 4200 does not AFAIK.
On Oct 10, 2012 10:38 AM, "Benny Amorsen" <benny+usenet at amorsen.dk> wrote:

> I am considering building a very simple setup with a number of ethernet
> interfaces on one switch each CCC-tunnelled through a common fiber to
> another switch. I.e. simply emulating a typical ethernet CWDM using
> EoMPLS.
>
> One feature which would be very handy is link state propagation across
> those EOMPLS links. Ideally, if the fiber breaks, the ports at each end
> go down so the equipment at each end quickly become aware of the break.
> Even better if loss of link on a port at one end also shuts down the
> link at the other end.
>
> Can the EX series do that? I'm thinking of the EX4550 in particular, but
> information about other EX-switches is welcome as well.
>
>
> /Benny
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>