[j-nsp] RE : Re: MX80 no more hash-key option in 12.2?

[Paul Vlaar]

On 23/10/12 10:23 AM, david.roy at orange.com wrote:
> Yes and you can check current hash config with the pfe cmd 
> 
> request pfe execute command "show jnh lb" target fpcX X=slot

First time I hear of this (hidden?) command. Doesn't work quite how you say:

mx80> request pfe execute command "show jnh lb" target fpc0
error: command is not valid on the mx80-48t

mx80> request pfe execute command "show jnh lb" target ?
Possible completions:
  tfeb0                Connect to Forwarding Engine Board

mx80> request pfe execute command "show jnh lb" target tfeb0
SENT: Ukern command: show jnh lb
GOT:
GOT: Unilist Seed Configured 0x8bce4c39 System Mac address 00:00:00:00:00:00
GOT: Hash Key Configuration: 0x0000000000e00000 0xffffffffffffffff
GOT:            IIF-V4: No
GOT:          SPORT-V4: Yes
GOT:          DPORT-V4: Yes
GOT:               TOS: No
GOT:
GOT:            IIF-V6: No
GOT:          SPORT-V6: Yes
GOT:          DPORT-V6: Yes
GOT:     TRAFFIC_CLASS: No
GOT:
GOT:          IIF-MPLS: No
GOT:      MPLS_PAYLOAD: Yes
GOT:          MPLS_EXP: No
GOT:
GOT:       IIF-BRIDGED: No
GOT:     MAC ADDRESSES: Yes
GOT:     ETHER_PAYLOAD: Yes
GOT:      802.1P OUTER: No
GOT:
GOT: Services Hash Key Configuration:
GOT:          SADDR-V4: No
GOT:          DADDR-V4: No
GOT:            IIF-V4: No
GOT:
GOT:          SADDR-V6: No
GOT:          DADDR-V6: No
GOT:            IIF-V6: No
GOT:
LOCAL: End of file


Looks good, I suppose?

	~paul