[j-nsp] 6pe between Cisco and Juniper
dr at cluenet.de
Mon Sep 3 12:12:49 EDT 2012
On Mon, Sep 03, 2012 at 11:22:02AM -0400, Colby Barth wrote:
> Based on the error message:
> "peer: <inet-unicast inet6-unicast inet6-labeled-unicast>(273) us:
> <inet-unicast inet6-labeled-unicast>(257)"
> You need to enable the unicast address family under ipv6
Not really. This "error" message just points out the different
capability set, but this shouldn't prevent the session to come up. The
common set of capabilities is <inet-unicast inet6-labeled-unicast>,
this should work fine. inet6-unicast ain't needed for 6PE anyway, and
JUNOS even stops you trying to do so.
There is a different reason why the session doesn't come up. Should be
visible in logs.
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0
More information about the juniper-nsp