[j-nsp] 6pe between Cisco and Juniper

[Olivier Benghozi]

Maybe you could try to configure next-hop-self on the Cisco's side, on all AFI?

Le 4 sept. 2012 à 13:12, Mihai Gabriel a écrit :

> You are partially right. The bgp session is established without
> inet6-unicast capability advertised by Juniper, but as soon as Juniper
> receives an ipv6 prefix with a native ipv6 next-hop from Cisco, it will
> immediately close the session .
> 
> My Cisco router is a route reflector with a lot of clients and some of them
> are advertising ipv6 prefixes with a native ipv6 next-hop and also ipv4
> prefixes.In this setup,closing the session will affect all services..