[j-nsp] 6pe between Cisco and Juniper

[Mihai Gabriel]

and move all the traffic through RR? :)

On Tue, Sep 4, 2012 at 4:47 PM, Olivier Benghozi <
olivier.benghozi at wifirst.fr> wrote:

> Maybe you could try to configure next-hop-self on the Cisco's side, on all
> AFI?
>
> Le 4 sept. 2012 à 13:12, Mihai Gabriel a écrit :
>
> > You are partially right. The bgp session is established without
> > inet6-unicast capability advertised by Juniper, but as soon as Juniper
> > receives an ipv6 prefix with a native ipv6 next-hop from Cisco, it will
> > immediately close the session .
> >
> > My Cisco router is a route reflector with a lot of clients and some of
> them
> > are advertising ipv6 prefixes with a native ipv6 next-hop and also ipv4
> > prefixes.In this setup,closing the session will affect all services..
>
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>